Typical Installation Options - kozy heat DASSEL DSL-36 Installation And Operation Manual

TYPICAL INSTALLATION OPTIONS

IMPORTANT: KOZY
THIMBLE PASS-THRU (#800-WPT)
MUST BE USED ON ALL HORIZONTAL
VENT RUNS USING 5" x 8" VENTING.
FOLLOW INSTRUCTIONS ON PAGE 22
OF THIS INSTALLATION MANUAL.
1/4" (6 mm)
clearance
TYPICAL CORNER INSTALLATION
TYPICAL VERTICAL INSTALLATION
15-1/2"
(394 mm)
HEAT WALL
42-1/2"
(1073 mm)
29-78"
(759 mm)
59-3/4"
(1517 mm)
36-3/8"
(924 mm)
PAGE 14
TYPICAL HORIZONTAL INSTALLATION
15-1/2"
(394 mm)
IMPORTANT:
HEAT SHIELD INCLUDED WITH THIS
FIREPLACE MUST BE INSTALLED
WHEN USING A 90-DEGREE ELBOW
DIRECTLY OFF THE TOP OF UNIT TO
HORIZONTALLY
VENT SYSTEM. THIS INCLUDES ANY
CORNER INSTALLATION
IMPORTANT:
shows the Horizontal Vent Heat Shield
installed. All other illustrations on this
page have the Horizontal Vent Heat Shield
removed for clarity purposes only.
1/4" (6 mm)
Clearance at back
1/4" (6 mm)
Clearance at back
36-3/8"
(924 mm)
THE HORIZONTAL
POSITION
.
NOTE: STAND-OFF HEAT
SHIELD NOT SHOWN FOR
CLARITY PURPOSES ONLY.
The illustration below
THE