Min. / Max. Vertical Terminations (8" X 6-5/8" Decreaser) - kozy heat DASSEL DSL-36 Installation And Operation Manual

VERTICAL TERMINATIONS
MINIMUM VERTICAL VENTING
WITH 8" x 6-5/8" DECREASER
6" (152 mm)
NOTE: Horizontal Vent Heat
Shield is not used on vertical
venting configurations.
Depending on your
particular venting
needs, a Decreaser
may be necessary to
terminate the venting
system.
NOTE: Pages 27-28 have information
on restrictor installation in conjunction
with venting installation.
Page 49 has information on restrictor
recommendations depending on
burner flame appearance and
instructions on installation after
venting is completed.
VENTING
TERMINATION CAP
4 FT
(1.22 m)
8" x 6-5/8" DECREASER
CAUTION: This gas
appliance must not be
connected to or joined with
any other chimney flue
serving another appliance.
8" x 6-5/8" DECREASER
PAGE 29
(Vertical cont.)
MAXIMUM VERTICAL VENTING
WITH 8" x 6-5/8" DECREASER
40 FT
(12.19 m)
6" (152 mm)