Vlan/Ssid Parameters; Other Parameters - Proxim ORiNOCO AP-4900M User Manual

Command Line Interface (CLI)
Parameter Tables
Encryption Key Format
If WEP security mode is configured, then the appropriate key size must be configured. The AP supports 63-, 128-, and
152-bit encryption keys. Encryption keys may be configured using either hexadecimal or ASCII values, as described in
the following table.
Key Length
64-bit
128-bit
152-bit
Each ASCII character corresponds to two hexadecimal digits. See
correspondence.

VLAN/SSID Parameters

Name
VLAN
Status
Management ID

Other Parameters

IAPP Parameters
Name
IAPP
IAPP Status
Periodic Announce
Interval (seconds)
Announce Response
Time
Handover Time-out
Max. Handover
Retransmissions
Send Announce Request
on Startup
NOTE: These parameters configure the Inter Access Point Protocol (IAPP) for roaming. Leave these settings at their
default value unless a technical representative asks you to change them.
Hexadecimal
10 characters (0 - F)
26 characters (0 - F)
32 characters (0 - F)
Type
Group
Integer
VlanId
Type
Group
Integer
Integer
Integer
Integer
Integer
Integer
ASCII
5 alphanumeric characters
13 alphanumeric characters
16 alphanumeric characters
ASCII Character Chart
Value
N/A
enable
disable (default)
-1 (untagged)
or 1 - 4094
Value
N/A
enable (default)
disable
80
120 (default)
160
200
2 seconds
410 ms
512 ms (default)
614 ms
717 ms
819 ms
1 - 4 (default 4)
enable (default)
disable
AP-4000/4000M/4900M User Guide
for ASCII/Hexadecimal
Access CLI Parameter
R vlan
RW vlanstatus
RW vlanmgmtid
Access CLI Parameter
R iapp
RW iappstatus
RW iappannint
R iappannresp
RW iapphandtout
RW iapphandretx
RW iappannreqstart
233