Configuring L2Tp Class Options - Cisco ASR 9000 Series Configuration Manual

Provisioning PPP LAC Session

Configuring L2TP Class Options

Perform this task to configure the various options for L2TP class.
SUMMARY STEPS
1. configure
2. l2tp-class class_name
3. authentication [ disable | enable ]
4. congestion control
5. digest [check disable |hash { MD5 | SHA1 } | secret { 0 | 7 | LINE } ]
6. hello-interval interval_duration
7. hostname host_name
8. receive-window size
9. retransmit initial [retries | retries_number | timeout {max max_seconds | min min_seconds }
10. timeout [no-user{ timeout_value | never } | setup setup_value ]
11. tunnel accounting accounting_method_list_name
12. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2 l2tp-class class_name
Example:
RP/0/RSP0/CPU0:router(config)# l2tp-class class1
Step 3
authentication [ disable | enable ]
Example:
RP/0/RSP0/CPU0:router(config-l2tp-class)# authentication
disable
Step 4
congestion control
Example:
RP/0/RSP0/CPU0:router(config-l2tp-class)# congestion
control
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.3.x
114
Establishing Subscriber Sessions
Purpose
Enters global configuration mode.
Configures the L2TP class command.
Enables the tunnel authentication. The Enable and
Disable options enables or disables the L2TP tunnel
authentication.
Enables L2TP congestion control.
OL-28375-03