Chapter 2: Using The Setup Wizard; Starting The Setup Wizard; Configuring Wan Connection - Cisco Small Business RV315W Administration Manual

Using the Setup Wizard

Starting the Setup Wizard

STEP 1
STEP 2

Configuring WAN Connection

Cisco RV315W Broadband Wireless VPN Router Administration Guide
This chapter describes how to use the Setup Wizard to quickly configure the initial
settings of your RV315W. Refer to the following sections:
• Starting the Setup Wizard
• Configuring WAN Connection
• Configuring Default LAN Settings
• Configuring Wireless Connection
• Completing the Setup Wizard
Click Setup Wizard in the left-hand navigation pane. The Setup Wizard launches.
If you are an expert, you can exit the Setup Wizard and click the menu in the left-
hand navigation pane to configure the specific feature directly. If you want to
continue, click Next to proceed to the WAN Configuration page. Or you can click
Exit to exit the Setup Wizard.
From the WAN Configuration page you can configure the WAN connection by
using information provided by your Internet Service Provider (ISP).
Depending on the requirements of your ISP, choose the Internet connection type
and configure the corresponding fields. The RV315W supports four types of
network addressing modes: DHCP, Static IP, PPPoE, and L2TP.
2
17