Cisco ASR 9000 Series Configuration Manual page 282

Configuring Web Logon
SUMMARY STEPS
1. configure
2. class-map type control subscriber match-all classmap_name
3. match timer name
4. match authen-status authenticated
5. policy-map type control subscriber policymap_name
6. event session-start match-all
7. class type control subscriber class_name do-until-failure
8. sequence_number activate dynamic-template dt_name
9. sequence_number activate dynamic-template dt_name
10. sequence_number set-timer timer_name value
11. event account-logon match-all
12. class type control subscriber class_name do-until-failure
13. sequence_number authenticate aaa list default
14. sequence_number deactivate dynamic-template dt_name
15. sequence_number stop-timer timer_name
16. event time-expiry match-all
17. class type control subscriber class_name do-all
18. sequence_number disconnect
19. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
class-map type control subscriber match-all
classmap_name
Example:
RP/0/RSP0/CPU0:router(config)# class-map type
control subscriber match-all IP_UNAUTH_COND
Step 3
match timer name
Example:
RP/0/RSP0/CPU0:router(config-cmap)# match timer
AUTH_TIMER
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.3.x
270
Configuring Subscriber Features
Purpose
Enters global configuration mode.
Configures a subscriber control class-map with the
match-all match criteria.
Configures a match criteria for the class along with timer
details.
OL-28375-03