Statistics Infrastructure; Configuring Statistics Ids (Statsd) - Cisco ASR 9000 Series Configuration Manual

Statistics Infrastructure

Command or Action
Configuring Service Accounting: Example
configure
aaa accounting service S1 group SG1
aaa service-accounting brief
dynamic-template
type service s1
accounting aaa list S1 type service periodic-interval 600
ipv4 access-group ACL1
service-policy input QOS1 acct-stats
service-policy output QOS2 acct-stats
!
!
end
Statistics Infrastructure
The accounting counters are maintained by the service accounting statistics IDs (statsD) infrastructure. Service
accounting interacts with the statistics infrastructure in this manner:
• Each feature has a statistics collector process that is responsible for returning statistics counters for that
• A single collector can handle counters for multiple features.
• An accounting process, the service accounting management agent, uses the access library to register for
There is a polling period to pull the data from statsD. To support sub-second accuracy on stop records, the
statistics are immediately pulled when the session is terminated, without waiting for any polling method to
get accurate data. The same method is followed by session accounting and service accounting. Sub-second
accuracy is not supported for data reported in interim records, because no data is pulled while sending interim
accounting records.

Configuring Statistics IDs (statsD)

The statsD is configured to poll feature statistics by default every 900 seconds (that is, every 15 minutes).
Perform this task to change the default figure to either increase or decrease the polling interval.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.3.x
62
feature.
notifications and request statistics, and pushes to a radius server.
Configuring Authentication, Authorization, and Accounting Functions
Purpose
• No—Exits the configuration session
without committing the configuration
changes.
• Cancel—Remains in the configuration
mode, without committing the
configuration changes.
OL-28375-03