Regulatory, Compliance, And Safety Information; Laser Safety; General Laser Warning; Class 1 Laser Product Warning (Single-Mode) - Cisco ASR 9000 Series Installation Manual

Regulatory, Compliance, and Safety Information

Regulatory, Compliance, and Safety Information
This section contains information on laser safety.
For other regulatory, compliance, and safety information, including translated safety warnings, see the
Cisco ASR 9000 Series Aggregation Services Router Regulatory Compliance and Safety

Laser Safety

Single-mode Ethernet line cards (all of the line cards) are equipped with a Class 1 laser. Multimode
Ethernet line cards (Gigabit Ethernet) are equipped with a Class 1 LED. These devices emit invisible
radiation. Do not stare into operational line card ports. The following laser warnings apply to the line
cards:
•
•
•

General Laser Warning

Because invisible laser radiation may be emitted from the aperture of the port when no cable is
Warning
connected, avoid exposure to laser radiation and do not stare into open apertures. Statement 70

Class 1 Laser Product Warning (Single-mode)

Class 1 Laser Product. Statement 1008
Warning

Class 1 LED Product Warning (Multimode)

Class 1 LED Product (Multimode). Statement 123
Warning
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
3-10
General Laser Warning, page 3-10
Class 1 Laser Product Warning (Single-mode), page 3-10
Class 1 LED Product Warning (Multimode), page 3-10
Chapter 3 Verifying and Troubleshooting the Line Card Installation
Information.