Parameterized QoS Syntax
Using Change of Authorization (CoA), it is possible to update the service-policy by modifying the class-maps
that were previously configured by the parameterized QoS. Modifying can involve removing existing classes,
or adding new classes. To make updates to the service-policy, see
on page
Parameterized QoS Syntax
Parameterized QoS Syntax
QoS Action
Parameter
Shape
Shape in
percentage
Police (Variant
1)
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.3.x
182
189.
Qualifiers
QoS Action
CLI Equivalent
RADIUS
Equivalent -
Example
QoS Action
CLI Equivalent
RADIUS
Equivalent -
Example
QoS Action
CLI Equivalent
Commands
shape(<rate-in-kbps>)
shape average <shape-rate> <kbps>
qos-policy-out:add-class(sub,(class-default),shape(14700))
Shape-rpct(<rate-in-pct>)
shape average percent < rate-in-pct >
qos-policy-out:add-class(sub,(class-default),shape-pct(25))
police( <conform-rate-in-kbps>,
<conform-burst-in-kBytes>,
<exceed-rate-in-kbps>,
<exceed-burst-in-kbytes>,
<conform-action>,
<exceed-action>,
<violate-action>)
police rate <conform-rate> <kbps> burst <conform-burst> <kbps>
peak-rate <exceed-rate>
exceed-burst <exceed-burst>
conform-action <action>
exceed-action <action>
violate-action <action>
Deploying the Quality of Service (QoS)
Modifying Service Policy through CoA ,
OL-28375-03