Activating Vpdn Logging - Cisco ASR 9000 Series Configuration Manual

Provisioning PPP LAC Session

Activating VPDN Logging

Perform this task to activate logging of VPDN event information. When VPDN event logging is enabled,
VPDN event messages are logged as the events occur.
Note Tunnel start and stop records are generated without any tunnel statistics.
SUMMARY STEPS
1. configure
2. vpdn
3. logging [cause| cause-normal | dead-cache | local | tunnel-drop | user ]
4. history failure
5. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2 vpdn
Example:
RP/0/RSP0/CPU0:router(config)# vpdn
Step 3
logging [cause| cause-normal | dead-cache | local |
tunnel-drop | user ]
Example:
RP/0/RSP0/CPU0:router(config-vpdn)# logging
local
RP/0/RSP0/CPU0:router(config-vpdn)# logging
user
RP/0/RSP0/CPU0:router(config-vpdn)# logging
cause
RP/0/RSP0/CPU0:router(config-vpdn)# logging
tunnel-drop
Step 4
history failure
Example:
RP/0/RSP0/CPU0:router(config-vpdn)# history
failure
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.3.x
110
Purpose
Enters global configuration mode.
Enters the VPDN sub-mode.
Enables the logging of generic VPDN events.
Enables logging of VPDN failure events to the history failure
table.
Establishing Subscriber Sessions
OL-28375-03