Cisco ASR 9000 Series Configuration Manual page 170

DHCPv6 Features
Command or Action
Step 16 policy-map type control subscriber policy_name
Example:
RP/0/RSP0/CPU0:router(config)# policy-map type
control subscriber policy1
Step 17
event session-start match-first
Example:
RP/0/RSP0/CPU0:router(config-pmap)# event
session-start match-first
Step 18 class type control subscriber name do-all
Example:
RP/0/RSP0/CPU0:router(config-pmap)# class type
control subscriber ipoe_test1 do-all
Step 19 sequence_number activate dynamic-template
dynamic-template_name
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# 24 activate
dynamic-template v6_test1
Step 20
end-policy-map
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)# end-policy-map
Step 21 policy-map type control subscriber policy_name
Example:
RP/0/RSP0/CPU0:router(config)# policy-map type
control subscriber policy1
Step 22
event session-start match-all
Example:
RP/0/RSP0/CPU0:router(config-pmap)# event
session-start match-all
Step 23 class type control subscriber name do-all
Example:
RP/0/RSP0/CPU0:router(config-pmap)# class type
control subscriber pta_class do-all
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.3.x
158
Establishing Subscriber Sessions
Purpose
• No—Exits the configuration session without
committing the configuration changes.
• Cancel—Remains in the configuration mode,
without committing the configuration changes.
Configures the subscriber control policy map.
Configures the policy event with the match-first
criteria.
Configures the policy event with the match-first
criteria.
Activates actions related to dynamic template.
Configures the end policy map.
Configures the subscriber control policy map.
Configures the policy event with the match-all criteria.
Configures the policy event with the match-first
criteria.
OL-28375-03