Configuring A Circuit-Id For An Interface - Cisco ASR 9000 Series Configuration Manual

Establishing Subscriber Sessions
Command or Action
Step 6
show dhcp ipv4 proxy profile name name
Example:
RP/0/RSP0/CPU0:routershow dhcp ipv4 proxy
profile name profile1

Configuring a Circuit-ID for an Interface

Perform this task to configure a circuit-id for an interface.
SUMMARY STEPS
1. configure
2. dhcp ipv4
3. interface type interface-path-id
4. proxy information option format-type circuit-id value
5. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1 configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2
dhcp ipv4
Example:
RP/0/RSP0/CPU0:router(config)# dhcp ipv4
OL-28375-03
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide, Release
Purpose
• Yes— Saves configuration changes and exits the
configuration session.
• No—Exits the configuration session without committing
the configuration changes.
• Cancel—Remains in the configuration mode, without
committing the configuration changes.
(Optional) Displays the details proxy profile information.
Purpose
Enters global configuration mode.
Enters DHCP IPv4 configuration submode.
Enabling DHCP Proxy
4.3.x
127