Configuring Qos Accounting - Cisco ASR 9000 Series Configuration Manual

Configuring QoS Accounting

DSLAM to CPE
Encapsulation
CLI Option
snap-rbe
snap-dot1q-rbe
mux-rbe
mux-dot1q-rbe
To enable QoS overhead accounting, see
Configuring QoS Accounting
Perform this task to enable QoS Layer2 overhead accounting.
SUMMARY STEPS
1. configure
2. dynamic-template
3. type [ppp|ip-subscriber|service]name
4. qos-account [ AAL5| user-defined ] [ mux-1483routed | mux-dot1q-rbe | mux-pppoa | mux-rbe |
snap-1483routed | snap-dot1q-rbe | snap-ppoa | snap-rbe ]
5. exit
6. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1 configure
Example:
RP/0/RSP0/CPU0:router# configure
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.3.x
192
ALE Tags (RFC 4679)
Overhead (in bytes) Data Link
28 AAL5
32 AAL5
24 AAL5
28 AAL5
Configuring QoS Accounting, on page
Deploying the Quality of Service (QoS)
Encapsulation1 Encapsulation2
Untagged Ethernet Ethernet over AAL5
LLC without FCS
(6)
Single-Tagged Ethernet over AAL5
Ethernet LLC without FCS
(6)
Untagged Ethernet Ethernet over AAL5
Null without FCS
(8)
Single-Tagged Ethernet over AAL5
Ethernet Null without FCS
(8)
192.
Purpose
Enters global configuration mode.
OL-28375-03