Dhcpv6 Address Or Prefix Pool; Configuring Ipv6 Address Or Prefix Pool Name - Cisco ASR 9000 Series Configuration Manual

DHCPv6 Features
Configuring Ambiguous VLANs: An example
configure
interface Bundle-Ether100.12
encapsulation ambiguous dot1q 14 second-dot1q any
ipv4 address 2.1.12.1 255.255.255.0
service-policy type control subscriber PL1
ipsubscriber ipv4 l2-connected
initiator dhcp
!
!
end

DHCPv6 Address or Prefix Pool

An address or prefix pool represents a pool of available address or prefixes from which a delegating router
assigns an address or delegates a prefix to the requesting router. The Distributed Address Pool Service (DAPS)
manages and maintains address or prefix pools for DHCPv6.
DHCPv6 Prefix Delegation involves a delegating router selecting a prefix and delegating it on a temporary
basis to a requesting router. The delegating router assigns the address or delegates the prefix from the address
pool or prefix pool to the requesting router.
For more information about configuring DHCPv6 address or prefix pool, see
Prefix Pool Name, on page

Configuring IPv6 Address or Prefix Pool Name

Perform this task to configure IPv6 address or prefix pool name under dynamic template configuration mode.
SUMMARY STEPS
1. configure
2. dynamic-template
3. type ipsubscriber dynamic-template_name
4. dhcpv6 delegated-prefix-pool pool-name
5. Use the commit or end command.
6. type ppp dynamic-template_name
7. dhcpv6 address-pool pool-name
8. Use the commit or end command.
9. type ipsubscriber dynamic-template_name
10. dhcpv6 address-pool pool-name
11. Use the commit or end command.
12. ipv6 nd framed-prefix-pool pool-name
13. Use the commit or end command.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.3.x
164
164.
Establishing Subscriber Sessions
Configuring IPv6 Address or
OL-28375-03