Cisco ASR 9000 Series Configuration Manual page 167

Establishing Subscriber Sessions
DHCPv6 Features
SUMMARY STEPS
1. configure
2. dynamic-template type ppp dynamic_template_name
3. ppp authentication chap
4. ppp ipcp peer-address pool pool_name
5. ipv4 unnumbered interface-type interface-path-id
6. ipv6 enable
7. Use the commit or end command.
8. class-map type control subscriber match-any class-map_name
9. match protocol ppp
10. end-class-map
11. Use the commit or end command.
12. class-map type control subscriber match-all class-map_name
13. match protocol dhcpv6
14. end-class-map
15. Use the commit or end command.
16. policy-map type control subscriber policy_name
17. event session-start match-first
18. class type control subscriber name do-all
19. sequence_number activate dynamic-template dynamic-template_name
20. end-policy-map
21. policy-map type control subscriber policy_name
22. event session-start match-all
23. class type control subscriber name do-all
24. sequence_number activate dynamic-template dynamic-template_name
25. end-policy-map
26. Use the commit or end command.
27. interface type interface-path-id
28. description LINE
29. ipv6 enable
30. service-policy type control subscriber name
31. encapsulation dot1q 801
32. ipsubscriber ipv6 l2-connected
33. initiator dhcp
34. Use the commit or end command.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide, Release
4.3.x
OL-28375-03 155