Cisco ASR 9000 Series Configuration Manual page 154

DHCPv6 Server and DHCPv6 Proxy
Command or Action
Step 13
class class-name
Example:
RP/0/RSP0/CPU0:router(config-dhcpv6-proxy-profile)#
class proxy-red
Step 14 helper-address vrf vrf_name ipv6_address
Example:
RP/0/RSP0/CPU0:router(config-dhcpv6-proxy-profile)#
helper-address vrf my-server-vrf 1:1:1::1
Step 15 Use the commit or end command.
Step 16 interface type interface-path-id proxy profile profile_name
Example:
RP/0/RSP0/CPU0:router(config-dhcpv6)# interface
BundleEther100.1 proxy profile my-proxy-profile
Step 17
Use the commit or end command.
Enabling DHCPv6 for Different Configuration Modes: An example
configure
dhcp ipv6
profile my-server-profile server
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.3.x
142
Establishing Subscriber Sessions
Purpose
Defines a class in a proxy profile and enters the proxy
profile class sub-mode.
Configures DHCPv6 address as a helper address to the
proxy.
The helper address can be configured only
Note
under the proxy profile and proxy profile class
sub-modes.
commit—Saves the configuration changes and remains
within the configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the
configuration session.
• No—Exits the configuration session without
committing the configuration changes.
• Cancel—Remains in the configuration mode,
without committing the configuration changes.
Associates a DHCPv6 proxy configuration profile to an
IPv6 interface.
commit—Saves the configuration changes and remains
within the configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the
configuration session.
• No—Exits the configuration session without
committing the configuration changes.
• Cancel—Remains in the configuration mode,
without committing the configuration changes.
OL-28375-03