Modifying Service Policy Through Coa - Cisco ASR 9000 Series Configuration Manual

Deploying the Quality of Service (QoS)
Command or Action
Step 9
Cisco-AVPair+= "ip:qos-policy-out=add-class(sub,
(class-default,data_out), bw-rpct(20))"
Example:
Cisco-AVPair = "ip:qos-policy-out=add-class(sub,
(class-default,data_out), bw-rpct(20))"
Step 10 Cisco-AVPair+= "ip:qos-policy-out=add-class(sub,
(class-default,class-default))"
Example:
Cisco-AVPair = "ip:qos-policy-out=add-class(sub,
(class-default,class-default))"
Configuring Parameterized Subscriber Policy Defined and Applied through RADIUS: An example
Cisco-AVPair = "ip:qos-policy-in=add-class(sub, (class-default),police(2000))"
Cisco-AVPair += "ip:qos-policy-in=add-class(sub, (class-default,voice_in), pri-level(1),
police(256))"
Cisco-AVPair += "ip:qos-policy-in=add-class(sub, (class-default,video_in), pri-level(2),
police(1000))"
Cisco-AVPair += "ip:qos-policy-in=add-class(sub, (class-default,data_in), set-qos-grp(4))"
Cisco-AVPair += "ip:qos-policy-in=add-class(sub, (class-default,class-default),
set-qos-grp(7))"
Cisco-AVPair += "ip:qos-policy-out=add-class(sub, (class-default), shape(4000))"
Cisco-AVPair += "ip:qos-policy-out=add-class(sub, (class-default,voice_out),
pri-level(1),queue-limit-us(10000))"
Cisco-AVPair += "ip:qos-policy-out=add-class(sub,
(class-default,video_out),queue-limit-us(30000), shape(2000))"
Cisco-AVPair += "ip:qos-policy-out=add-class(sub, (class-default,data_out), bw-rpct(20))"
Cisco-AVPair += "ip:qos-policy-out=add-class(sub, (class-default,class-default))"

Modifying Service Policy through CoA

Perform this task to modify service-policy through CoA.
The Web Portal or Radius server that supports CoA should be configured to generate a CoA request with
Note
Cisco VSA corresponding to the steps in this task.
OL-28375-03
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide, Release
Modifying Service Policy through CoA
Purpose
Configures the cisco-avpair class-map in output
direction for the bandwidth action parameter.
Configures the cisco-avpair class-map in output
direction for the class action parameter.
For the complete list of QoS action
Note
parameters that can be configured and
applied through RADIUS, see
Parameterized QoS Syntax section in
Parameterized QoS Syntax, on page 182.
4.3.x
189