Cisco Asr 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide - Cisco ASR 9000 Series Configuration Manual

Installing and Activating the BNG Pie on Cisco ASR 9000 Series Router
SUMMARY STEPS
1. admin
2. install add {pie_location | source | tar}
3. install activate {pie_name | id}
DETAILED STEPS
Command or Action
Step 1 admin
Example:
RP/0/RSP0/CPU0:router# admin
Step 2 install add {pie_location | source | tar}
Example:
RP/0/RSP0/CPU0:router(admin)# install add
tftp://223.255.254.254/softdir/asr9k-bng-px.pie
Step 3
install activate {pie_name | id}
Example:
RP/0/RSP0/CPU0:router(admin)# install activate
asr9k-bng-px.pie
What to Do Next
During upgrade from Release 4.2.1 to Release 4.3.0, it is recommended that the Cisco ASR 9000 base
Note
image pie (asr9k-mini-px.pie) is installed prior to installing the BNG pie (asr9k-bng-px.pie).
After BNG pie is installed, you must copy BNG related configurations from the flash or tftp location to the
router. If BNG pie is deactivated and activated again, then load the removed BNG configurations by executing
the load configuration removed command from the configuration terminal.
Note Most of the BNG feature configurations are moved to a new namespace partition, and hence BNG features
are not available by default now. To avoid inconsistent BNG configurations before, or after installing the
BNG pie, run the clear configuration inconsistency command, in EXEC mode.

Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,

Release 4.3.x
20
Broadband Network Gateway Overview
Purpose
Enters the administration mode.
Installs the pie from the tftp location, on to the Cisco
ASR 9000 Series Router.
Activates the installed pie on the Cisco ASR 9000
Series Router.
OL-28375-03