Configuring The Vpdn Template - Cisco ASR 9000 Series Configuration Manual

Provisioning PPP LAC Session
Command or Action
Step 5
process-failures switchover
Example:
RP/0/RSP0/CPU0:router(config-vpdn-redundancy)#
process-failures switchover
Step 6
Use the commit or end command.

Configuring the VPDN Template

Perform this task to configure the vpdn template:
SUMMARY STEPS
1. configure
2. vpdn template
3. l2tp-class class_name
4. tunnel busy timeout timeout_value
5. caller-id mask-method remove match match_substring
6. dsl-line-info-forwarding
7. ip tos type_of_service_value
8. vpn id value
9. vpn vrf vrf_name
10. Use the commit or end command.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.3.x
106
Purpose
Forces a switchover in case of a process failure.
commit—Saves the configuration changes and remains within
the configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the
configuration session.
• No—Exits the configuration session without committing
the configuration changes.
• Cancel—Remains in the configuration mode, without
committing the configuration changes.
Establishing Subscriber Sessions
OL-28375-03