Cisco ASR 9000 Series Configuration Manual page 178

DHCPv6 Features
Command or Action
Step 9
type ipsubscriber dynamic-template_name
Example:
RP/0/RSP0/CPU0:router(config-dynamic-template)# type
ipsubscriber my-ipv6-template
Step 10 dhcpv6 address-pool pool-name
Example:
RP/0/RSP0/CPU0:router(config-dynamic-template-type)#
dhcpv6 address-pool my-ipsub-addr-pool
Step 11
Use the commit or end command.
Step 12 ipv6 nd framed-prefix-pool pool-name
Example:
RP/0/RSP0/CPU0:router(config-dynamic-template-type)#
framed-prefix-pool my-slaac-pool
Step 13 Use the commit or end command.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.3.x
166
Establishing Subscriber Sessions
Purpose
• Yes— Saves configuration changes and exits the
configuration session.
• No—Exits the configuration session without
committing the configuration changes.
• Cancel—Remains in the configuration mode,
without committing the configuration changes.
Configures dynamic template of type ipsubscriber and
enters the dynamic-template type configuration mode.
Configures IPv6 address pool for IPoE subscribers.
commit—Saves the configuration changes and remains
within the configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the
configuration session.
• No—Exits the configuration session without
committing the configuration changes.
• Cancel—Remains in the configuration mode,
without committing the configuration changes.
Configures prefix pool to be used by SLAAC only.
commit—Saves the configuration changes and remains
within the configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the
configuration session.
• No—Exits the configuration session without
committing the configuration changes.
• Cancel—Remains in the configuration mode,
without committing the configuration changes.
OL-28375-03