Configuring Aaa Attribute Format Function - Cisco ASR 9000 Series Configuration Manual

Configuring AAA Attribute Format Function

!
end
Configuring AAA Attribute Format Function
Perform this task to configure a function for the AAA attribute format. The function is for stripping the
user-name till the delimiter.
SUMMARY STEPS
1. configure
2. aaa attribute format format-name
3. username-strip prefix-delimiter prefix_delimiter
4. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2 aaa attribute format format-name
Example:
RP/0/RSP0/CPU0:router(config)# aaa
attribute format red
Step 3 username-strip prefix-delimiter prefix_delimiter
Example:
RP/0/RSP0/CPU0:router(config-id-format)#
username-strip prefix-delimiter @
Step 4 Use the commit or end command.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.3.x
42
Configuring Authentication, Authorization, and Accounting Functions
Purpose
Enters global configuration mode.
Specifies the format name for which the function is defined.
Configures the function to strip the username preceding the prefix
delimiter, which is @.
commit—Saves the configuration changes and remains within the
configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the configuration
session.
• No—Exits the configuration session without committing the
configuration changes.
• Cancel—Remains in the configuration mode, without
committing the configuration changes.
OL-28375-03