Cisco ASR 9000 Series Configuration Manual page 189

Deploying the Quality of Service (QoS)
SUMMARY STEPS
1. configure
2. policy-map type qos q_in
3. class class-default
4. service-policy q_child_in
5. policy-map type qos q_out
6. class class-default
7. service-policy q_child_out
8. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1 configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2 policy-map type qos q_in
Example:
RP/0/RSP0/CPU0:router(config)# policy-map
type qos q_in
Step 3
class class-default
Example:
RP/0/RSP0/CPU0:router(config-pmap)# class
class-default
Step 4
service-policy q_child_in
Example:
RP/0/RSP0/CPU0:router(config-pmap-c)#
service-policy q_child_in
Step 5 policy-map type qos q_out
Example:
RP/0/RSP0/CPU0:router(config)# policy-map
type qos q_out
Step 6 class class-default
OL-28375-03
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide, Release
Configuring Service-policy and Applying Subscriber Settings Through RADIUS
Purpose
Enters global configuration mode.
Configures the policy-map for the type qos.
Configures or modifies the parent class-default class.
You can configure only the class-default class in a parent
Note
policy. Do not configure any other traffic class.
Applies a bottom-level policy to the top-level class-default class.
Configures the policy-map for the type qos.
Configures or modifies the parent class-default class.
4.3.x
177