Cisco ASR 9000 Series Configuration Manual page 254

IGMP to Unicast QoS Shaper Correlation
SUMMARY STEPS
1. configure
2. router igmp
3. vrf vrf-name
4. traffic profile profile-name
5. Use the commit or end command.
6. show igmp unicast-qos-adjust statistics
7. show igmp unicast-qos-adjust statistics interface interface-name
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Step 2 router igmp
Example:
RP/0/RSP0/CPU0:router(config)# router igmp
Step 3
vrf vrf-name
Example:
RP/0/RSP0/CPU0:router(config-igmp)# vrf
vrf1
Step 4 traffic profile profile-name
Example:
RP/0/RSP0/CPU0:router(config-igmp-vrf1)#
traffic profile routepolicy1
Step 5
Use the commit or end command.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.3.x
242
Purpose
Enters global configuration mode.
Enter the router process for igmp configuration mode.
Enters the vrf configuration mode.
Configures the route-policy to be used to map the bandwidth
profile.
commit—Saves the configuration changes and remains within the
configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits the
configuration session.
• No—Exits the configuration session without committing the
configuration changes.
• Cancel—Remains in the configuration mode, without
committing the configuration changes.
Configuring Subscriber Features
OL-28375-03