Provisioning PPP LAC Session
Command or Action
Step 12
Use the commit or end command.
Configuring L2TP Class Options: An example
configure
l2tp-class class1
authentication enable
congestion-control
digest check disable
hello-interval 876
hostname l2tp_host
receive-window 163
retransmit initial timeout 60
timeout no-user 864
tunnel accounting aaa_l2tp
!
end
Configuring Softshut for VPDN
Perform this task to configure softshut for vpdn.
SUMMARY STEPS
1. configure
2. vpdn
3. softshut
4. Use the commit or end command.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.3.x
116
Establishing Subscriber Sessions
Purpose
commit—Saves the configuration changes and
remains within the configuration session.
end—Prompts user to take one of these actions:
• Yes— Saves configuration changes and exits
the configuration session.
• No—Exits the configuration session without
committing the configuration changes.
• Cancel—Remains in the configuration mode,
without committing the configuration
changes.
OL-28375-03