Creating A Policy-Map To Run During Pppoe Session - Cisco ASR 9000 Series Configuration Manual

Provisioning PPP PTA Session
Command or Action
Creating a PPP Dynamic-Template: An example
configure
dynamic-template type ppp ppp_pta_template
ppp authentication pap
ppp authentication pap chap
!
!
end

Creating a Policy-Map to Run During PPPoE Session

Perform this task to create a policy-map that will activate a PPP dynamic-template during a PPPoE subscribers
session. As an example, this policy-map activates a dynamic template during a session-start event. Also, this
policy-map applies a locally-defined authorization setting during a session-activate event.
SUMMARY STEPS
1. configure
2. policy-map type control subscriber policy_name
3. event session-start match-all
4. class type control subscriber class_name do-until-failure
5. sequence_number activate dynamic-template dynamic-template_name
6. event session-activate match-all
7. class type control subscriber class_name do-until-failure
8. sequence_number authenticate aaa list default
9. Use the commit or end command.
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.3.x
96
Purpose
• Cancel—Remains in the configuration mode,
without committing the configuration changes.
Purpose
Enters global configuration mode.
Establishing Subscriber Sessions
OL-28375-03