Cisco ASR 9000 Series Configuration Manual page 318

RADIUS Disconnect-Cause Attributes
Cause Code
605
606
607
608
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide,
Release 4.3.x
306
Value
VPN-Tunnel-Shut
VPN-Local-Disconnect
VPN-Session-Limit
VPN-Call-Redirect
RADIUS Attributes
Description
Tunnel teardown or tunnel setup
has failed.
Code is sent when there are active
sessions in a tunnel and the tunnel
goes down.
This code is not sent when
Note
tunnel authentication fails.
Call is disconnected by LNS PPP
module.
Code is sent when the LNS sends
a PPP terminate request to the
client. It indicates a normal PPP
disconnection initiated by the LNS.
VPN soft shutdown is enabled.
Code is sent when a call has been
refused due to any of the soft
shutdown restrictions previously
mentioned.
VPN call redirect is enabled.
OL-28375-03