Configuring Internet Access Policy - Cisco QuickVPN - PC Administration Manual

Setting Up and Configuring the WRVS4400N Wireless-N Router
Configuring Firewall Settings
STEP 3
Cisco WRVS4400N Wireless-N Gigabit Security Router with VPN Administration Guide
• Log—If checked, this ACL rule is logged when a packet match happens.
• Log Prefix—This string is attached in front of the log for the matched event.
• Source Interface—Select LAN, WAN, or ANY interface.
• Source—The source IP address to be matched against. You can define a
Single IP address, a Range of IP addresses (start IP and end IP), a Network
(IP Prefix and Network Mask), or ANY IP addresses.
• Destination—The destination IP address to be matched against. You can
define a Single IP address, a Range of IP addresses (start IP and end IP), a
Network (IP Prefix and Network Mask), or ANY IP addresses.
• Service Management Button—Click this button and the Service Tab to add
new service type to the Service drop-down menu.
• Scheduling
- Time—Enter the time period in which this rule is applied (used together
with Date). It can be set to Any Time.
- Date—Enter the days in a week on which this rule is applied (used
together with Time). It can be set to Any Day.
Click Save.

Configuring Internet Access Policy

The Firewall > Internet Access Policy window displays the policies that are used
by the router to control access to the Internet. A policy consists of four
components:
• The MAC- or IP- addresses of the personal computers to which to apply this
policy
• Whether to Deny or Allow Internet service for this policy
• The time and date on which to enable this policy, and
• The URLs or Keywords to apply this policy.
5
102