Configuring Session Limits - Cisco Small Business RV315W Administration Manual

Quality of Service (QoS)

Configuring Session Limits

Configuring Session Limits
STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV315W Broadband Wireless VPN Router Administration Guide
Use the Session Limits page to limit the maximum number of connection sessions
for the complete system, for a range of IP addresses, or for each physical port.
When the connection table is full, the new sessions that access the RV315W are
dropped.
To limit the maximum number of connection sessions:
Click QoS > Session Limits. The Session Limits page opens.
Click Enable to limit the number of connection sessions, or click Disable to disable
this feature.
If you enable this feature, enter the following information:
• IP-based Limit: Limits the sessions based on IP address. If you choose this
option, enter the maximum number of connection sessions allowed on each
IP address and/or the range of IP addresses.
• Port-based Limit: Limits the sessions based on the physical ports. If you
choose this option, enter the maximum number of connection sessions
allowed on each physical port.
• Maximum Sessions: Enter the maximum number of connection sessions
allowed on the complete system.
Click Save to save your settings.
7
79