Making An Internal Call; Making A Conference Call; Accessing A Direct-Dial Extension - Nortel Norstar System Administration Manual

266 Making internal calls

Making an internal call

Making a conference call

Accessing a Direct-Dial extension

Compact Plus System Administration Guide
When you want to make or receive internal or private network
calls, make calls to hunt group extensions, or access exchange
lines through line pools, use the button labelled Intercom. A
telephone may be assigned up to eight intercom keys.
1. Press an intercom key or, on M7100N/T7100 and
M7000/T7000 telephones, lift the handset.
2. Dial the extension number or a line pool access code.
To establish a conference call with two other Norstar/BST
telephones, a telephone must have two intercom keys assigned to
it.
1. Make or answer a call with one extension.
2. Put the call on hold.
3. Press the remaining intercom key and dial the second
extension.
4. Press ≤‹.
5. Press the held intercom key (step 2) to connect.
Direct-Dial allows you to dial designated telephones in your
Compact Plus system or private network with a single digit. You
can have one Direct-Dial extension in your Compact Plus system.
A person whose extension is a Direct-Dial extension is usually a
receptionist for your entire office or for a particular department.
To access the Direct-Dial extension, enter the Direct-Dial digit
(the default Direct-Dial number is 0).
Note that ISDN terminals cannot use the Direct-Dial digit to
reach a Direct-Dial extension.
P0607114 Issue 01