Turning A Manual Service On Or Off With A Feature Code - Nortel Norstar System Administration Manual

Turning a manual service on or off with a feature code

P0607114 Issue 01
For example, a destination code for Maidenhead might look like
this:
• Destination code: 01628
Normal route: 003
AbsorbLength: 0
• Route: 003
DialOut: No number
Use: Pool C
A caller wishing to dial Maidenhead might dial 01628 237625.
The system would recognise 01628 as a destination code. It
would select Pool C, absorb no digits, add no Dial Out digits, and
dial the remaining digits to complete the call.
Routing service modifications.
Changes to routes should only be made
during least busy call times or on an idle
system. Plan to programme routes when
user activity is at a minimum.
There are separate on and off codes for each of these services:
Ringing, Routing, and Restriction.
≤°‡⁄
≤£°‡⁄
≤°‡¤
≤£°‡¤
≤°‡‹
≤£°‡‹
To turn on a service
From a Control extension, enter the feature code to turn Ringing,
Restriction, or Routing service on. If activating Restriction or
Routing service, use the password ¤‹fl›fl (ADMIN).
The display shows Service Modes ON.
To turn off a service
From a Control extension, enter the feature code to turn Ringing,
Restriction, or Routing service off. The display shows Normal
followed by the name of the service (Ringing, Restr'n, or
Routing).
Turn on Ringing service.
Turn off Ringing service.
Turn on Restriction service.
Turn off Restriction service.
Turn on Routing service.
Turn off Routing service.
Compact Plus System Administration Guide
Services 167