Assigning Line Pool Access; Assigning A Prime Line To An Extension - Nortel Norstar System Administration Manual

42 Programming Terminals and Extensions

Assigning line pool access

Assigning a Prime line to an extension

Compact Plus System Administration Guide
Line pools allow the system to share lines among a number of
telephones, reducing line costs and the number of button
appearances on the telephones in the system.
This setting allows an extension to access one or more of the three
line pools available (A, B, or C). When you change the setting to
Yes for a line pool, the extension being programmed can access
any line in that line pool.
1. Place the programming overlay over the appropriate keys on
your programming telephone.
2. Press ≤••¤flfl‹›› (CONFIG). The
display shows Password :.
3. Press ‡¤‡fi°‡ (SAPLUS). The display shows
Terminals&Extns.
4. Press ≠. The display shows Show extn#:.
5. Enter the extension number of the telephone you want to
programme. The display shows nnn:nnn.
6. Press ≠ twice. The display shows Line
assignment.
7. Press '. The display shows LinePool access.
8. Press ≠.
9. Press CHANGE to select the setting: N (No) or Y (Yes).
10. Press ® to exit or ' to continue programming.
This setting assigns a Prime line to the telephone. When the
telephone is being used to make an outgoing call, the Prime line
is the first line the system selects.
1. Place the programming overlay over the appropriate keys on
your programming telephone.
2. Press ≤••¤flfl‹›› (CONFIG). The
display shows Password :.
3. Press ‡¤‡fi°‡ (SAPLUS). The display shows
Terminals&Extns.
4. Press ≠. The display shows Show extn#:.
5. Enter the extension number of the telephone you want to
programme. The display shows nnn:nnn.
6. Press ≠ twice. The display shows Line
assignment.
P0607114 Issue 01