Programming Call Services; 1St Display - Nortel Norstar System Administration Manual

Programming Call services

1st Display

P0607114 Issue 01
See "Chart 22: Call Services" on page 333 in Appendix A for a
programming overview.
The 1st Display option allows you to choose what call
information is first displayed on an extension.
Depending on the services you subscribe to, Call Display
information may contain:
• the number of the caller
• the name of the line in your Compact Plus system that the call
is on
• or the name of the caller, if you have a system speed dial coded
with that number and a name.
1. Place the programming overlay over the appropriate keys on
your programming telephone.
2. Press ≤••¤flfl‹›› (CONFIG). The
display shows Password:.
3. Press ‡¤‡fi°‡ (SAPLUS). The display shows
Terminals&Extns.
4. Press ≠. The display shows Show extn#:.
5. Enter the extension number of the telephone you wish to
programme. The display shows nnn:nnn.
6. Press ≠. The display shows Line access.
7. Press ' until the display shows Call services.
8. Press ≠. The display shows Auto call info.
9. Press '. The display shows 1st Display.
10. Press CHANGE to choose Name, Numb, or Line.
On an incoming call, the display may show Unknown number if
the information is not available from your telephone company.
You may see Private number on the display if the caller blocks
that information.
Compact Plus System Administration Guide
Call services 179