Setting System Speed Dial; Assigning A Number To A System Speed Dial Code - Nortel Norstar System Administration Manual

62 Setting System speed dial

Setting System speed dial

Assigning a number to a System speed dial code

Compact Plus System Administration Guide
Speed dial saves time by allowing you to dial frequently called
numbers using a three-digit code. For example, you can
programme telephone numbers for major suppliers or clients for
easy dialling by everyone in the office.
Speed dial codes numbered from 001 to 255 are intended for
system-wide use. Speed dial codes from 256 to 279 are for
personal use and can be programmed differently at each
extension. See "Changing a personal (user) speed dial code" on
page 113 for more information on the Speed dial feature.
The steps to programming System speed dial are:
• assign a number to a System speed dial code
• select an outgoing facility to be used for the number
• set whether the system displays the number or a name
(optional)
• set whether the speed dial number bypasses any restrictions on
the line or extension where it is used (optional).
See "Chart 1: System Speed Dial" on page 316 in Appendix A for
a programming overview.
See also "Using Speed Dial" on page 231.
First, choose a three-digit speed dial code (from 001 to 255) and
then assign a telephone number to it.
1. Place the programming overlay over the appropriate keys on
your programming telephone.
2. Press ≤••¤flfl‹›› (CONFIG). The
display shows Password:.
3. Press ‡¤‡fi°‡ (SAPLUS). The display shows
Terminals&Extns.
4. Press ' until the display shows Sys speed dial.
5. Press ≠. The display shows Speed dial #:.
6. Enter the System speed dial code (001 to 255).
7. Press ≠. The display shows the number currently
assigned to the code or No number.
8. Press CHANGE.
9. Enter the telephone number (up to 24 digits) and press OK.
P0607114 Issue 01