Changing The Name Of A Line; Making Changes To Call Forward No Answer - Nortel Enterprise Edge Feature Programming Telephone Manual

Changing the name of a line

Lines
Name
1. Select Lines.
2. Select a line number.
3. Double-click Line nnn.
where
nnn is an integer between 001 and 238
4. Type in a new name (up to 7 characters including spaces) and press Return.

Making changes to Call Forward No Answer

Terminals & Sets
Capabilities
Call Forward
You may also set Call Forward to forward all calls to either an internal or external
telephone number. This is done at the telephone set by pressing
more information about Forward All Calls, see
1. Select Terminals & Sets.
2. Select a DN number.
3. Select Capabilities.
4. Double-click Call Forward.
5. Choose a Fwd no answer setting: enter an internal or external number, or a
destination code.
P0908510 Issue 01
You can add a descriptive name to a line to further identify
it within your network. For example, in addition to the line
number you may wish to describe the line's properties (for
example, Local). For more information about
programming lines, see the "Systems Operations" chapter
in the Enterprise Edge Programming Operations Guide.
You can program a telephone to forward a call when
there is no answer to either an internal telephone (for
example, 221) or an external telephone (for example, 9-
123-4567). Additionally, you can route the unanswered
call to a destination code. For more information about
programming destination codes, see the chapter
"Systems operations" in the Enterprise Edge
Programming Operations Guide.
Enterprise Edge Feature Programming Telephone Guide
Frequent programming operations 25
ƒ›
Forwarding your calls
. For
on page 65.