Nortel Norstar System Administration Manual page 281

Compact plus release 5
Hide thumbs Also See for Norstar:
Table of Contents

Advertisement

Autodial key for an extension number
P0607114 Issue 01
1. Press ≤•¤. The display briefly shows Internl
autodial then Press a key.
2. Press the key you want to programme.
The display shows Extn#:_.
This step is not necessary on M7100N/T7100 telephones,
which have only one memory key.
3. Enter the number. The display shows Programmed.
For the M7100N/T7100N telephones, an external autodialler can
only be programmed using a line and not a line pool.
If you do not include a line selection in an Autodial number, the
call uses your Prime line (if you have one).
Note: If line pool access codes or destination codes are changed,
remember to re-programme autodial numbers as well.
Displays
987_
QUIT BKSP OK
Autodial full
key erased
Enter digits
QUIT OK
Intercom #: _
QUIT
Invalid number
Press a key
QUIT
Program and HOLD
Program and OK
QUIT OK
Programmed
Saving time with features 281
Continue to enter digits until the number is
complete. Press the volume bar or BKSP to
erase an incorrect digit. Press
when you are finished.
The memory allotted to Autodial numbers in
your Compact Plus system is full.
While programming external Autodial, you
erased the key by pressing
before entering any digits.
Enter the number you wish to programme
(choosing the line first if necessary) exactly
as you would if you were making a call.
Enter the internal telephone number you
wish to programme.
You are programming an internal Autodial
key and have entered a number that is not
an extension number on your system. Enter
a valid extension number. If the number you
are entering is a destination code, use
external Autodial.
Press the memory key you want to
programme.
Enter the number you want to programme
to the key, then press
Enter the number you want to programme
to the key, then press
include a line or line pool selection in an
Autodial sequence by selecting the line
before entering any digits.
The number is stored on the key.
Compact Plus System Administration Guide
or OK
or OK
.
or OK. You may

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Norstar compact plus release 5

Table of Contents