Ring Type; Ring Volume; Programming M7000/T7000 Memory Keys - Nortel Norstar System Administration Manual

Ring type

Ring volume

Programming M7000/T7000 memory keys

External autodial
Internal autodial (DSS)
P0607114 Issue 01
Press the key you want to move the line to.
Move line to:
Neither of the keys is erased. The lines, or the
QUIT
line and feature, simply switch places.
The key you are trying to move is not a line key.
Press a line
If you are trying to switch a line and a feature,
move the line to the Feature key and not the
Feature key to the line.
To help you recognise which telephone is ringing in an open
office, you can choose one of four distinctive rings for your
telephone.
1. Press ≤•fl.
2. Press 1, 2, 3, 4, or NEXT. You hear the selected ring for 2
seconds
.
3. Repeat until you hear the ring you prefer, then press ≥ or
The display briefly shows New ring stored
OK .
1. Press ≤•°‚ to make the telephone ring.
2. Press the volume bar to adjust the volume up or down.
The M7000/T7000 telephones have four programmable keys.
Features programmed on the keys have the following restrictions:
• do not have a display for information or instructions
• do not have line or extension keys
1. Press ≤•⁄.
2. Press the key you want to programme.
3. Enter the telephone number.
4. Press the ≥ key.
1. Press ≤•¤.
2. Press the key you want to programme.
3. Enter the telephone number.
Customising your telephone 227
Compact Plus System Administration Guide
.