Changing The Display Language - Nortel Norstar System Administration Manual

Changing the display language

P0607114 Issue 01
9. Press ' until the display shows Dialling opt'ns.
10. Press ≠. The display shows Automatic dial.
11. Press CHANGE to choose Automatic dial, Standard, or
Predial.
12. Press ® to exit or ' to continue programming.
The Norstar system supports a Visually Impaired Operator
Console (VIOC), which provides computer-based speech
synthesis for the programming interface. To use this function, the
display language needs to be set to Operating.
See 'Visually Impaired Operator Console' on page 218 for
information on using this feature.
1. Place the programming overlay over the appropriate keys on
your programming telephone.
2. Press ≤••¤flfl‹›› (CONFIG). The
display shows Password:.
3. Press ¤‹fl›fl (ADMIN). The display shows
Terminals&Extns.
4. Press ≠ The display shows Show extn#:.
.
5. Enter the extension number of the telephone you wish to
programme. The display shows nnn:nnn.
6. Press ≠. The display shows Capabilities.
7. Press ' until the display shows User prefernces.
8. Press ≠. The display shows Model: followed by a
five-digit code.
9. Press ' until the display shows Language:.
10. Press CHANGE to choose English or Opratng.
11. Press ® to exit or ' to continue programming.
Programming User preferences 115
Compact Plus System Administration Guide