Common Feature Display Messages - Nortel Norstar System Administration Manual

Common feature display messages

P0607114 Issue 01
You may see the following displays when using a feature
Someone is already using programming, or the
Access denied
feature you are trying to use is not compatible
with the configuration of the telephone or line.
You have tried to use a feature, but you have not
Denied in admin
been given access to it in programming.
You have taken more than 15 seconds to press
Feature timeout
a button in response to a display.
You have entered a feature code that is used by
Inactive feature
an application programme that your system does
not have.
You have entered an invalid feature code.
Invalid code
You have tried to use a feature that is not
Not available
available in the present set-up of your Compact
Plus system.
You cannot use the feature you have chosen
Set locked
because your telephone is locked. See 'Locking
an extension' on page 93.
Press £ or press VIEW‚or ·VIEW to view a
1234567890123...
number that is too long to fit on the display. Press
VIEW‚ OK
≥
This indicates a long-distance call. (May be
§
available with Call Display services.)
Either you are receiving an internal call from
239>221
telephone 239 forwarded by telephone 221, or
you have an answer button for telephone 221
and an internal call from 239 is ringing on 221.
You are connected to an internal call. Press
221
TRANSFER to transfer the call.
TRANSFER
You are receiving a call from telephone 221.
221 calling
You have received a Ring Again offer for a call to
Call 221?
an internal telephone. Press the flashing internal
YES NO
line button or YES to call the number again. On
T7100/M7100N and T7000/M7000 telephones,
just lift the receiver. Otherwise, press NO or wait
30 seconds for the Ring Again offer to expire. For
an explanation of Ring Again, see 'Using Ring
Again' on page 284.
The person to whom you camped the call did not
Camped: 221
answer it. The call has come back to you. Press
CALLBACK
the line button or CALLBACK to reconnect to the
call.
You are connected to an external call. Press
Line001
TRANSFER to transfer the call.
TRANSFER
Either you are receiving an external call
Line001>221
forwarded from telephone 221, or you have an
answer button for telephone 221 and an external
call is ringing on that telephone.
About your system telephones 219
or OK when you are finished.
Compact Plus System Administration Guide
: