Changing The Time By An Hour; Automatic Time & Date - Nortel Norstar System Administration Manual

74 Changing the time and date

Changing the time by an hour

Moving one hour forward with ** FWD
Moving one hour backward with ** BACK
Automatic Time & Date
Compact Plus System Administration Guide
12. Press CHANGE (or NEXT if there is no change).
13. Enter the month (01 to 12).
14. Press NEXT. The display shows Day:.
15. Press CHANGE.
16. Enter the day of the month (01 to 31).
17. Press ® to exit.
Norstar offers two features that allow you to adjust the time
quickly for changes in British Standard Time.
1. Press ≤••‹·‹ (FWD). The display shows
Forward by 1Hr?.
2. Press YES. The display briefly shows Time Changed.
1. Press ≤••¤¤¤fi (BACK). The display shows
Backward by 1Hr?.
2. Press YES. The display briefly shows Time Changed.
When a Basic Rate Interface (BRI) outgoing call is answered, the
network may provide time and date information to the Norstar
system. The Auto Time&Date feature enables the Norstar system
to use this information to automatically update the time and date
on the Norstar system.
1. Place the programming overlay over the appropriate keys on
your programming telephone.
2. Press ≤••¤flfl‹›› (CONFIG). The
display shows Password:.
3. Press ¤‹fl›fl (ADMIN). The display shows
Terminals&Extns.
4. Press ' until the display shows System prgrming.
5. Press '. The display shows Featr settings.
6. Press ≠. The display shows Backgrnd music:.
7. Press ' until the display shows AutoTime&Date.
8. Press CHANGE to choose Y or N.
9. Press ® to exit or ' to continue programming.
P0607114 Issue 01