Nortel Norstar System Administration Manual page 255

Answering a camped call
P0607114 Issue 01
Camped: 21
CALLBACK
Line001 hung up
Not in service
CALLBACK
Release a call
While you are on a call, you hear a beep whenever there is a
camped call waiting. Press the flashing line key or intercom key
that the call is camped on. If your extension has no free lines,
finishing one of your active calls releases a line for the camped
call.
The telephone to which you camped a call
did not answer the call. The call has come
back to you. Press CALLBACK or the line
key to
re-connect to the call. On the
M7100N/T7100 telephone, just pick up the
handset.
A call you camped has come back to you,
but the caller hung up before you could
re-connect.
The telephone to which you have camped
a call is out of service or is being used for
programming. The call has come back to
you. Press CALLBACK or the line key to re-
connect to the call. On the M7100N/T7100
and M7000/T7000 telephones, just pick
up the handset.
The line that the camped call is on is in
use, or that line does not appear at your
telephone. Release the line or release an
internal line.
Compact Plus System Administration Guide
Routing calls 255