Nortel Norstar System Administration Manual page 221

P0607114 Issue 01
You may see the following displays when using a feature
No button free
Make calls first
No free lines
No line selected
In use: 221
Incoming only
9_
QUIT BKSP OK
Invalid number
Line denied
Restricted call
About your system telephones 221
You have tried to make, receive, or pick up a call
when no line button was available. Some
features also require you to have a button free.
Releasing calls can free up line buttons.
The feature you tried to use requires you to be on
an active call at your telephone. This display also
appears when information about a call has been
cleared by a system reset.
All the lines or line pools available to the
telephone are in use. This display also appears
when you have tried to dial an external number or
use a feature that conflicts with the lines, line
pools, or Prime line used by the telephone.This
must be corrected by your Customer Service
representative or installer.
The telephone has been set up to dial an external
number on a Prime line but the telephone does
not have a prime line. This must be corrected by
your Customer Service representative or
installer.
You have tried to programme redirection while
someone else is programming redirection. Only
one person can programme line redirection at a
time.
The line you are trying to use for redirecting calls
is for incoming calls only. Choose an outgoing
line.
Continue entering digits. Press the volume bar or
BKSP to delete incorrect digits. Press
when you are finished.
You have entered an invalid line pool code or an
invalid destination code.
You have selected a line that is private to another
telephone.
The destination you have chosen for Line
redirection is restricted.
Compact Plus System Administration Guide
:
≥ or OK