Programming Or Changing Ccr Destinations; Testing Your Custom System Answer And Ccr - Nortel Norstar System Administration Manual

Programming or changing CCR destinations

Testing your custom System Answer and CCR

P0607114 Issue 01
1. Press ≤•°‹‹and enter ¤‹fl›fl
(ADMIN).
2. The display shows Auto att. grtngs.
3. Press NEXT. The display shows CCR Tree.
4. Press SHOW. The display shows Dial 0: Att.
5. Press CHANGE if you want to choose Attendant, None, CCR or
grp. Press NEXT until the display shows Dial 0: and the
current destination when the caller presses zero.
6. Press CHANGE to select the appropriate destination.
Each number from zero to nine and * can direct a call to the
attendant telephone or one of the nine CCR groups. The * can
be set up to make the system play the CCR greeting again
(Repeat). If a digit is set to None, it has no destination.
7. Using NEXT and CHANGE, select the destinations for the
remaining digits.
If you have more than one external line, you can call in to hear
your greetings by dialling the number used by external callers to
call the attendant set or a line that is answered using CCR.
To call systems with only one external line, you have to go to a
telephone that is not connected to your system.
Auto Attendant 197
Compact Plus System Administration Guide