Inputs / Outputs; Configuration Of Inputs; Configuration Of Outputs - RADWAG WPY User Manual

18. INPUTS / OUTPUTS

Scale are equipped with 4 inputs / 4 outputs. To adjust software to the users
needs configure inputs outputs in the submenu
in the submenu <
• indicator inputs,
• indicator outputs.
In order to enter submenu <
:
and then
„ Inputs / Outputs".

18.1. Configuration of inputs

Procedure:
• Enter <
• Choose <
a list of functions to ascribe,
• Choose the required function from the list and return to weighing
saving the changes according to ch. 12.2 of this manual.
Notice:
The list of functions to ascribe to inputs are described in APPENDIX B
of this manual. By default inputs have no ascribed functions <None>.

18.2. Configuration of outputs

Ascribing a function to the output enables the output at the same time.
If an output has no ascribed function it is disabled.
Procedure:
• Enter <
• Choose <
will see the list of functions:
Inputs / Outputs>:
Inputs / Outputs> according to ch. 18 of this manual,
Inputs> and enter the selected input you will see
Inputs / Outputs> according to ch. 18 of this manual,
Outputs> and enter the required output, then you
Inputs / Outputs>, press
67