RADWAG WPY User Manual page 102

Mass
Min
Max
Product
Down-weighing
Automatic batching
[DA]
Mass
Mass for fast dosing
Product
Down-weighing
Outputs
[O]
Delay
[TI]
Time
Description
Zero
[Z]
Tare
[T]
Set Tare
[ST]
Mass of an ingredient to be dosed
MIN threshold for dosing process ingredient
MAX threshold for dosing process ingredient
Dosing process ingredient uploaded from
Products database
Enables switching on checkweiging mode
(weighing on minus)
Function enabling automatic weighing
(automatic dosing). The function enables
controlling outputs dedicated for dosing
process.
Mass of an ingredient to be dosed
Mass of an ingredient for bulk dosing
(in case of two-step dosing process)
Dosing process ingredient uploaded from
Products database
Enables switching on checkweiging mode
(weighing on minus)
Function enabling setting the status of
terminal's outputs for controlling peripheral
devices plugged to those outputs.
Accessible settings: None – output disabled;
"0" – output with low status; "1" – output with
high status.
Function determining interval between
carrying out the following dosing process
steps. The function determines pending time
for the following step counted in seconds.
Determination of pending time counted in
seconds
Text description of an interval displayed on
terminal's touch panel
Zeroing the weighing platform, equal to
operation of the 0 function key on the
terminal's front panel
Tarring the weighing platform, equal to
operation of the T function key on the
terminal's front panel
Tare setting function, equal to operation of
the <Set tare> function key on the terminal's
front panel
102