Reporting Of Completed Dosing Processes - RADWAG WPY User Manual

7. [O]
Outputs
8. [F] Set
flags
8. [TI]
Delay
An instance of mixed dosing (manual and automatic) has been extended by
signalling its corresponding phases to present the possibilities of the working
mode <Dosing>.

28.7. Reporting of completed dosing processes

On completing each dosing process, the terminal automatically generates
a report on that process.
Notice:
Submenu: "
report printout template" enables optional modifying of the report
template (see ch. 16.2.3 of this user manual).
Default form of the report from dosing template:
----------------------------------------------
Dosing process
----------------------------------------------
{40:Start date:,-25}{180}
{40:End date:,-25}{181}
{40:Name:,-25}{175}
{40:Code:,-25}{176}
{40:Status:,-25}{182}
{40:Measurements:,-25}
----------------------------------------------
{185:(50,-20)
(40:Nominal Mass:,-25)(186)(11)
(40:Difference:,-25)(187)(11)
----------------------------------------------
}{40:Mass:,-25}{184}{11}
----------------------------------------------
The report from each completed process is simultaneously saved in the
database of <
date and hour of process execution and dosing process status. List
of data for the dosing process – see ch. 32.7.6 of this user manual.
Output 12 – „1"
Signal flag 1 – „1"
Signal flag 2 – „1"
[10s] Dosing
completed
Devices / Printer /
(7)(11)
Report from dosing>, where the files are named by their
Output 12 akes high status ("1") – signal confirming
carrying out the dosing process on the weighing
platform no. 2 is lit up
Setting the characteristic point of the process, which
is a condition for carrying out part of the process on
the weighing platform no. 1
Displaying a text message on the terminal confirming
completion of dosing process
Printouts /
112
Dosing