RADWAG WPY User Manual page 170

{212}
3) Vehicle: Description
{213} 3) Vehicle scale: Start date
{214} 3) Vehicle scale: Status
{215} 3) Vehicle scale: Entry mass
{216} 3) Vehicle scale: Exit mass
{220} Recipe: Name
{221} Recipe: Code
{222} Recipe: Cycle number
{223} Recipe: Number of cycles
{224} Recipe: Process progress
{225} Recipe: Process progress in %
{226} Recipe: Ingredient name
{227} Recipe: Difference
{228} Recipe: Portion
{229} Recipe: Nominal mass
{230} Recipe: Number of current ingredient
{231} Recipe: Number of ingredient
{232} Recipe: Number of current manufacturing unit
{233} Recipe: Number of manufacturing unit
{234} Recipe: Status
{235} Recipe: Min
{236} Recipe: Max
{237} Recipe: Ingredient code
{240} Recipe report: Start Date
{241} Recipe report: End Date
{242} Recipe report: Result
{243} Recipe report: Number of measurements
{244} Recipe report: Total
{245} Recipe report: Measurements
{246} Measurements: Nominal mass
{247} Measurements: Difference
{248} Recipe report: Ingredient code
Notice:
Variables {0} and {1} is terminated by CR LF, i.e. the cursor
1)
is moved to the beginning of the next line by default,
In case of variable {39}, each position from the database (1,2-n)
2)
is formated as follows: Position 1 - {39:1}, Position 2 - {39:2}, etc.
3) Variables not related to „Standard software",
4) In case of variable {64}, each line (L1-Ln) is formatted according
to the template: Line 1 - {64:L1}, Line 2 - {64:L2}, etc.
170