Local Setting Of A Working Mode; Description Of Functions And Setting Dosing Process - RADWAG WPY User Manual

28.3. Local setting of a working mode

Local settings for the working mode <
on pressing a hot key <
Global> settings are dedicated for the process of creating simple
<
dosing processes, e.g.: dosing a single ingredient on all weighing platforms.

28.4. Description of functions and setting dosing process

While creating dosing process, the user has acces sto the following
functions:
Short
Icon
cut
[DH]
Local parameters>:
Ask for multiplier
Ask for number of cycles
Confirm batching
ingredients manually
No. of weighings for
calculating the correction
Global
Batching outputs
Bulk batching output
Correction
Maximum correctional
value
Function
Dose manually
Dosing> are accessible
Causes setting a question for dosing
process multiplier, i.e. the number which is
used to multiply the values of mass of all
components.
Causes setting a question on number of
dosing process cycles, i.e. number of
repetitions of the same process.
Causes enabling manual confirmation by
pressing "Enter/Print" key on terminal's
keyboard for each weighing process.
Determines the number of recent
measurements which are analyzed for
calculating automatic correction in dosing
Global settings of doisng process
Enables setting the outputs for dosing (fine
dosing in case of two-step dosing process)
Enables setting outputs for bulk dosing in
case of two-step dosing process
Enables determining global value of
correction for all weighing platforms
Enables detemining maximal value of
correction, which can be automatically
determined for all weighing platforms
Description
Function recalling manual weighing of
dosing process ingredient (manual dosing)
101