Test; Transponder Card Reader - RADWAG WPY User Manual

16.3.4. Test

Operators, using parameter <
to the scale works properly.
Procedure:
• Enter submenu <
manual,
• After entering parameter <
with an ASCII text box and HEX (hexadecimal) field,
• After scanning the code is entered to the ASCII field and HEX filed
and at the bottom of the window a test result is displayed.
When:
• <Prefix> and <Suffix> declared in settings are the same as
<Prefix> and <Suffix> in the read code then the test result is
<Positive>,
• <Prefix> and <Suffix> declared in settings are not the same as
<Prefix> and <Suffix> in the read code then the test result is
<Negative>.

16.4. Transponder card reader

Selecting operator (logging in) can be done in two ways:
• Typing a password on a keyboard,
• Approaching a transponder card to the reader.
The card needs to be registerd first.
Notice:
In case of problems with reading transponder cards check the submenu
< Communication> and set appropriate baud rate (default 9600b/s).
Test>, can verify if a barcode connected
Barcode Scanner> according to ch. 16.3 of this
Test> window <Test> is opened
53