RADWAG WPY User Manual page 152

- command accepted and in progress
T_A CR LF
- command completed
T_D CR LF
- command accepted and in progress
T_A CR LF
- command comprehended but tare range overflow appeared
T_v CR LF
- command accepted and in progress
T_A CR LF
- time limit for stable result exceeded
T_E CR LF
- command comprehended but cannot be executed
T_I CR LF
33.4.3. Get tare value
Syntax: OT CR LF
Reply: OT_TARA CR LF – command executed
Frame format:
1 2
O T
Tare
Unit
Notice:
Tare values are always send in calibration unit.
33.4.4. Set tare value
Syntax: UT_TARE CR LF, where TARE – tare value
Possible replies:
UT_OK CR LF
UT_I CR LF
ES CR LF
Notice:
Use dots as decimal points in tare values.
3 4-12
space tare
- 9 characters justified to the right
- 3 characters justified to the left
- command completed
- command correct, but not accessible at the moment
- command incorrect (e.g. incorrect tare format)
13 14 15
space unit
152
16 17 18
space CR
19
LF