Down-Weighing; Checkweighing; Tare Mode - RADWAG WPY User Manual

24.3. Down-weighing

Software allows to weigh in the "down-weighing" mode. It consist in putting
the load on the pan and taking off/removing portions of it with concurrent
saving weighings equal to the portions taken off the pan.
Procedure:
• Enter parameters group <
to ch. 24 of this manual,
• Enter the required working mode and choose <
and then set the required option.
Accessible options:
No
Yes

24.4. Checkweighing

In case of enabling the checkweighing mode, printouts are performed only
when a weighing is between MIN and MAX thresholds that have been
defined before.
Procedure:
• Enter parameters group <
of this manual,
• Enter the required working mode and choose <
then set the required option.
Options:
-
No
-
Yes

24.5. Tare mode

This function enables users to set parameters for tarring.
- Traditional weighing
- Down-weighing mode
Every weighing is recorded
Only weighings between MIN, MAX are recorded.
Working Modes> according
Working Modes> according to ch. 24
85
Down-weighing>
Checkweighing>